Dental biomaterials redefined: molecular docking and dynamics-driven dental resin composite optimization.

BACKGROUND: Dental resin-based composites are widely recognized for their aesthetic appeal and adhesive properties, which make them integral to modern restorative dentistry. Despite their advantages, adhesion and biomechanical performance challenges persist, necessitating innovative strategies for improvement. This study addressed the challenges associated with adhesion and biomechanical properties in dental resin-based composites by employing molecular docking and dynamics simulation. METHODS: Molecular docking assesses the binding energies and provides valuable insights into the interactions between monomers, fillers, and coupling agents. This investigation prioritizes SiO2 and TRIS, considering their consistent influence. Molecular dynamics simulations, executed with the Forcite module and COMPASS II force field, extend the analysis to the mechanical properties of dental composite complexes. The simulations encompassed energy minimization, controlled NVT and NPT ensemble simulations, and equilibration stages. Notably, the molecular dynamics simulations spanned a duration of 50 ns. RESULTS: SiO2 and TRIS consistently emerged as influential components, showcasing their versatility in promoting solid interactions. A correlation matrix underscores the significant roles of van der Waals and desolvation energies in determining the overall binding energy. Molecular dynamics simulations provide in-depth insights into the mechanical properties of dental composite complexes. HEMA-SiO2-TRIS excelled in stiffness, BisGMA-SiO2-TRIS prevailed in terms of flexural strength, and EBPADMA-SiO2-TRIS offered a balanced combination of mechanical properties. CONCLUSION: These findings provide valuable insights into optimizing dental composites tailored to diverse clinical requirements. While EBPADMA-SiO2-TRIS demonstrates distinct strengths, this study emphasizes the need for further research. Future investigations should validate the computational findings experimentally and assess the material's response to dynamic environmental factors.

Tetralogy of Fallot regurgitation energetics and kinetics: an intracardiac flow analysis of the right ventricle using computational fluid dynamics.

Repaired Tetralogy of Fallot (rTOF) patients suffer from pulmonary regurgitation and may require pulmonary valve replacement (PVR). Cardiac magnetic resonance imaging (cMRI) guides therapy, but conventional measurements do not quantify the intracardiac flow effects from pulmonary regurgitation or PVR. This study investigates intracardiac flow parameters of the right ventricle (RV) of rTOF by computational fluid dynamics (CFD). cMRI of rTOF patients and controls were retrospectively included. Feature-tracking captured RV endocardial contours from long-axis/short-axis cine. Ventricular motion was reconstructed via diffeomorphic mapping, serving as domain boundary for CFD simulations. Vorticity (1/s), viscous energy loss (ELoss, mJ/L) and turbulent kinetic energy (TKE, mJ/L) were quantified in RV outflow tract (RVOT) and RV inflow. These parameters were normalized against total RV kinetic energy (KE) and RV inflow vorticity to derive dimensionless metrics. Vorticity contours by Q-criterion were qualitatively compared. rTOF patients (n = 15) had mean regurgitant fraction 38 ± 12% and RV size 162 ± 35 mL/m2. Compared to controls (n = 12), rTOF had increased RVOT vorticity (142.6 ± 75.6/s vs. 40.4 ± 11.8/s, p < 0.0001), Eloss (55.6 ± 42.5 vs. 5.2 ± 4.4 mJ/L, p = 0.0004), and TKE (5.7 ± 5.9 vs. 0.84 ± 0.46 mJ/L, p = 0.0003). After PVR, there was decrease in normalized RVOT Eloss/TKE (p = 0.0009, p = 0.029) and increase in normalized tricuspid inflow vorticity/KE (p = 0.0136, p = 0.043), corresponding to reorganization of the "donut"-shaped tricuspid ring-vortex. The intracardiac flow in rTOF patients can be simulated to determine the impact of PVR and improve the clinical indications guided by cardiac imaging.

Evaluation of the effect of chemical disinfection and ultraviolet disinfection on the dimensional stability of polyether impression material: an in-vitro study.

BACKGROUND: Various methods, chemical and physical, disinfect dental impressions. Common chemicals include 1% Sodium Hypochlorite and 2% glutaraldehyde, while UV radiation is a prevalent physical method. Few studies compare their effects on dimensional stability in polyether impressions. This study aims to assess such stability using different disinfection methods. Therefore, this study was planned to evaluate the dimensional stability of polyether impression material using different disinfection methods. METHODS: This in vitro study compared the effects of chemical disinfectants (1% Sodium Hypochlorite and 2% glutaraldehyde) and UV irradiation on the dimensional stability of polyether impression material. Groups A, B, C, and D, each with ten samples (N = 10), were studied. Group A was untreated (control). Group B was treated with 2% glutaraldehyde for 20 min, Group C with 1% Sodium Hypochlorite for 20 min, and Group D with UV rays for 20 min. A pilot milling machine drill was used to make four parallel holes labeled A, B, C, and D in the anterior and premolar regions from right to left. After sequential drilling, four implant analogs were positioned using a surveyor for accuracy. Ten open-tray polyether impressions were made and treated as described in the groups, followed by pouring the corresponding casts. Distortion values for each disinfection method were measured using a coordinate measuring machine capable of recording on the X- and Y-axes. RESULTS: A comprehensive analysis was conducted using the one-way ANOVA test for distinct groups labeled A, B, C, and D, revealing significant differences in the mean distances for X1, X2, X4, X5, and X6 among the groups, with p-values ranging from 0.001 to 0.000. However, no significant differences were observed in X3. Notably, mean distances for the Y variables exhibited substantial differences among the groups, emphasizing parameter variations, with p-values ranging from 0.000 to 0.033. The results compared the four groups using the one-way ANOVA test, revealing statistically significant distance differences for most X and Y variables, except for X3 and Y4. Similarly, post-hoc Tukey's tests provided specific pairwise comparisons, underlining the distinctions between group C and the others in the mean and deviation distances for various variables on both the X- and Y-axes. CONCLUSIONS: This study found that disinfection with 1% sodium hypochlorite or UV rays for 20 min maintained dimensional stability in polyether impressions.

Peripapillary Choroidal Neovascular Membrane: A Case Report.

Peripapillary choroidal neovascular membrane (PCNM) is an abnormal growth of blood vessels beneath the retina near the optic disc. We report a case of a 60-year-old Saudi female with a history of hypertension, hypothyroidism, and epilepsy who presented to the emergency room (ER), reporting a sudden decrease in vision over the past month. Ophthalmic examination revealed reduced visual acuity. The patient received aflibercept via intravitreal injection every four weeks. On follow-up, she reported improvement in symptoms. It has been shown that intravitreal anti-vascular endothelial growth factor (VEGF) not only preserves visual acuity but also produces anatomic improvement when used alone or in conjunction with other therapeutic modalities like photodynamic therapy, laser photocoagulation, and subretinal surgery, as PCNM is aberrant blood vessel growth under the retina. Only a few cases have been recorded in Saudi Arabia; we report this case to emphasize the importance of diagnosis and timely treatment with anti-VEGF.

Relationships between perception of black triangles appearance, personality factors and level of education.

This analytical cross-sectional study evaluated the perception of black triangles (BT) and examined the relationships between the perception of BT, personality factors, different educational backgrounds and demographic factors. 435 participants were included and divided into four groups: dentists, clinical (4th and 5th year) dental students, pre-clinical (3rd year) dental students, and laypeople. Participants' perception of the attractiveness of smile profiles of maxillary and mandibular anterior dentition with BT was rated using a ten-point VAS scale with 0 being the least, and 10 being the most attractive smile profile. The personality was assessed using the NEO-FFI personality questionnaire. The smile profile with multiple large BT was rated the least attractive for the maxillary (mean = 3.6) and mandibular (mean = 3.9) tested profiles. The smile profile without BT was rated the most attractive for the maxillary (mean = 9.1) and mandibular (mean = 8.8) tested profiles. The dental professionals perceived the maxillary smile profile with multiple large BT as less attractive than the non-dental participants (t = - 2.715, P = 0.007). Being a male, having dental education, having lower Neuroticism scores, as well as having higher Openness, Agreeableness, Conscientiousness, and Extraversion scores predicted and contributed more towards perceiving various tested smile profiles as more attractive. These findings show that black triangles negatively impacts the perception of smile attractiveness, and that personality traits and having dental education impact the perception of smile attractiveness for smiles with black triangles.

Review of MR spectroscopy analysis and artificial intelligence applications for the detection of cerebral inflammation and neurotoxicity in Alzheimer's disease.

INTRODUCTION: Magnetic resonance spectroscopy (MRS) has an emerging role as a neuroimaging tool for the detection of biomarkers of Alzheimer's disease (AD). To date, MRS has been established as one of the diagnostic tools for various diseases such as breast cancer and fatty liver, as well as brain tumours. However, its utility in neurodegenerative diseases is still in the experimental stages. The potential role of the modality has not been fully explored, as there is diverse information regarding the aberrations in the brain metabolites caused by normal ageing versus neurodegenerative disorders. MATERIALS AND METHODS: A literature search was carried out to gather eligible studies from the following widely sourced electronic databases such as Scopus, PubMed and Google Scholar using the combination of the following keywords: AD, MRS, brain metabolites, deep learning (DL), machine learning (ML) and artificial intelligence (AI); having the aim of taking the readers through the advancements in the usage of MRS analysis and related AI applications for the detection of AD. RESULTS: We elaborate on the MRS data acquisition, processing, analysis, and interpretation techniques. Recommendation is made for MRS parameters that can obtain the best quality spectrum for fingerprinting the brain metabolomics composition in AD. Furthermore, we summarise ML and DL techniques that have been utilised to estimate the uncertainty in the machine-predicted metabolite content, as well as streamline the process of displaying results of metabolites derangement that occurs as part of ageing. CONCLUSION: MRS has a role as a non-invasive tool for the detection of brain metabolite biomarkers that indicate brain metabolic health, which can be integral in the management of AD.

Properties of a novel composite elastomeric polymer vinyl polyether siloxane in comparison to its parent materials: a systemic review and meta-analysis.

BACKGROUND: The effectiveness of newly developed elastomeric polymer hybrid siloxane (PVES), which combines the properties of polyethylene (PE) and polyvinyl siloxane (PVS) elastomers, has been a subject of interest in recent studies. This study aimed to assess the physical properties of hybrid PVES materials by analyzing existing data from recent studies on this topic. METHODS: A systematic literature search was conducted to retrieve peer-reviewed articles published up to February 5, 2023. The population, intervention, comparison, and pertinent outcomes were specified under the PICO framework. The primary data analysis was performed in Microsoft Excel, while statistical analysis used Meta-Essentials. RESULTS: Of the 1152 articles assessed, 14 met the inclusion criteria. The meta-analysis of the selected studies indicated that polyether (PE) and polyvinyl siloxane (PVS) were highly correlated (two-tailed p-values of 0.000 and 0.001, respectively) with the improved tensile strength of vinyl polyether siloxane (PVES) with a significantly positive effect size. Similarly, the hydrophilic characteristics of PVES were significantly improved compared to those of PE and PVS. PE was a significant contributor to the hydrophilic characteristics of PVES, with a two-tailed p-value of 0.000. The effect size was highly positive for hydrophilicity but showed high heterogeneity. It was also observed that the dimensional accuracy of PVES was comparable to those of PE and PVS, with no statistically significant differences among the three materials. CONCLUSIONS: PVES showed promising features, with improved tensile strength and hydrophilic characteristics compared to those of PE and PVS.

Radiation hazards of the Ukraine nuclear power plants: how can international blood and marrow stem cell transplant societies help?

Any conflict in countries that process nuclear power plants raises concerns of the potential radiation injuries to the people in that region and beyond such as the current conflict in Ukraine. International healthcare organizations and societies should prepare for the potential scenarios of nuclear incidents. The Worldwide Network for Blood and Marrow Transplantation (WBMT) and its members, have recent experience preparing for this type of events such as the Fukushima incident in 2011. In this article, we discuss the risks of radiation exposure, current guidelines, and scientific evidence on hematopoietic support, including the role of hematopoietic stem cell transplant (HCT) for those exposed to nuclear radiation, and the role that the WBMT and other global BMT societies can play in triaging and managing people suffering from radiation injuries.

28Assessment of thermal variations in the pulpal chamber during fabrication of provisionals using two different techniques and three materials.

BACKGROUND: The issue of an increase in pulpal temperature affects direct and indirect techniques, where the fabricating material will come in direct contact with the prepared teeth. OBJECTIVE: The aim of this study was to assess the pulpal thermal variations during provisional fabrication using direct and indirect-direct techniques, with three commonly commercially available provisional fabricating materials. METHOD: In this vitro analytical study, 120 extracted human teeth were placed in a dentulous mould and dental stone was poured, to create a working model with an embedded natural right maxillary central incisor. Recording of thermal changes in the pulp chamber during provisionalization with direct (technique 1) and indirect-direct (technique 2) using three common types of provisional crown materials. 120 provisional crowns were fabricated using polymethyl methacrylate (DPI) (Group 1), Bis-acryl composite (Protemp 4) (Group 2) and Visible-light polymerizing (VLP) Urethane Dimethacrylate (Revotek LC) (Group 3) by two techniques and recording of peak temperature changes were done. Temperature rise in the pulp chamber was recorded using a thermocouple. RESULTS: The mean initial and final temperature of the pulp chamber recorded for Groups 1, 2 and 3 was 31.52, 32.56; 31.01, 32.34; 32.29, 34.47 for technique 1 and 29.13, 30.5; 29.29, 31.11; 30.31, 32.65 for technique 2. The mean change in temperature was higher in Group 3 compared to the other groups. CONCLUSION: The temperature rise detected according to this study was within the safer pulpal health limits with all the investigated materials and techniques. The resin material recommended for clinical use when the direct technique is employed for the fabrication of provisional crowns is bis-acryl composite resin (Protemp-4) as it caused minimal temperature rise in the pulpal chamber.

Dietary supplement of fermented grass forage regulates growth performance, antioxidant capacity, and immune response of broiler chickens.

The current study aimed to determine the effects of different levels of fermented Juncao grass (FG) on growth parameters, blood constituents, immunity, and antioxidative properties of broilers. A total of 240 (21-d-old) broiler chicks were randomly distributed to four dietary treatments of sixty birds, with six replicate pens and ten birds in each. Fermented grass was added to the basal diet at four levels with 0, 5, 10, and 15% FG. The results revealed that broilers fed 5% FG had significantly higher (P < 0.05) final body weight (FBW), average daily gain (WG) and average daily feed intake (ADFI). The best conversion ratio (FCR) was recorded for broilers supplemented with 5% FG compared to the group supplemented with 15% FG (P < 0.05). Increasing FG % decreased (P < 0.05) anti-inflammatory cytokines IL-4, IL-6, and IL-10. However, FG increased (P < 0.05) proinflammatory cytokines IFN-γ, IL-1, IL-2, IL-12, and TNF-α (P < 0.05). Moreover, IgA, IgG, and IgM levels increased (P < 0.05) with increasing FG %. In addition, increasing FG % in broiler rations significantly increased (P < 0.05) serum antioxidant levels of T-AOC, GSH-PX, SOD, CAT, NO and GSH, but decreased (P < 0.05) MDA levels compared to the control group. Conclusively, fermented Juncao grass would be considered a novel herbal feed additive for improving broiler performance, immunity, antioxidant, and health status. Nevertheless, further research at the molecular level is needed to quantify the effects of these herbal components on cellular and humoral immune functions in broiler chickens.

Spectroscopic properties (FT-IR, NMR and UV) and DFT studies of amodiaquine.

Amodiaquine (AQ) was synthesized by a condensation reaction and characterized by experimental FT-IR, 1H and 13C nuclear magnetic resonance (NMR) and UV spectroscopies. In the present work, Density Functional Theory (DFT) calculations. The structural and spectroscopic (FT-IR, 1H and 13C NMR and UV) data of amodiaquine molecule in ground state have been investigated by using Density Functional Theory (DFT). The calculations have been performed at the using B3LYP method with 6-311++G(d,p) and 6-311++G(2d, p) basis sets theory level were performed, first, to confirm its structure, then to explain its reactive nature through its molecular properties such as natural charges, local and global reactivity descriptors or natural bond orbital (NBO). Afterwards, the calculated properties were compared with experimental results. The 1H and 13C NMR chemical shifts were calculated by using the gauge-independent atomic orbital (GIAO) method, while the electronic UV-Vis spectrum is predicted using the time-dependent density functional theory (TD-DFT). Globally, the computerized results showed good agreement close similarity with the experimental values. The molecular properties such as natural charges, local and global reactivity descriptors, molecular electrostatic potential (MEP), natural bond orbital (NBO) of title molecule were calculated insights into the stability, reactivity and reactive sites on the molecule. The calculated energy band gap (ELUMO-EHOMO) value of AQ was found to be 4.09 eV suggesting that it could be considered as a hard molecule with high stability, supported by global reactivity descriptors. Molecular electrostatic potential (MEP) analysis revealed heteroatoms (oxygen and nitrogen) as the most putative nucleophilic sites when hydrogen atoms to which they are linked appear as electrophilic sites. The potential use of amodiaquine as non-linear optical (NLO) material and its thermodynamic indicators have also been assessed.

Comparative evaluation of open tray impression technique: investigating the precision of four splinting materials in multiple implants.

BACKGROUND: This study aimed to determine the relative positioning accuracy of multiple implants utilizing four distinct types of splinting materials. METHODS: The purpose of this in-vitro study was to compare the precision of four splinting materials in an open tray impression technique in multiple implant situations. Based on the material used for splinting, four groups were made (n = 40)- Group A: Conventional Method, Group B: Prefabricated Pattern Resin Framework, Group C: Prefabricated Metal Framework, Group D: Light Cured Pattern Resin, these groups were compared with the master model. A heat-cured clear acrylic resin and a master model were constructed. A pilot milling machine drill was used to drill four parallel holes in the anterior and premolar regions, which were later labeled as A, B, C, and D positions from right to left. Then, sequential drilling was carried out, and four 3.75­mm diameter and 13-mm long ADIN implant analogs with internal hex were placed in the acrylic model using a surveyor for proper orientation. The impression posts were then manually screwed to the implant analogs using an open tray, and they were secured to the implants using 10 mm flat head guide pins with a 15 N.cm torque. 10 Open tray polyether impressions were made, and casts were poured. Each splinting method's distortion values were measured using a coordinate measuring machine capable of recordings in the X-, Y-, and Z-axes. Comparison of mean distances for X1, X2, and X3 was made using the Kruskal-Wallis test, and Pairwise comparison was done using Post Hoc Tukey's Test. RESULTS: The differences between the groups were significant when assessing the distances X1, X2, and X3 (p < 0.05). The comparison of deviations between the groups revealed a statistically significant difference (p < 0.05) for the deviation distance X3 but not for the deviation distances X1 and X2. For distance Y1, the difference between the groups was statistically significant (p0.05), but it was not significant for distances Y2 and Y3. A statistically significant difference was seen in the comparison between the groups (p < 0.05) for the deviation distances Y1, Y2, and Y3. The results were statistically significant for the distance Z1 comparisons, namely, control vs. Group A (p = 0.012), control vs. Group B (p = 0.049), control vs. Group C (p = 0.048), and control vs. Group D (p = 0.021), and for distance Z3 comparison for control vs. Group A (p = 0.033). The results were statistically insignificant for the distance Z2 comparisons (p > 0.05). CONCLUSIONS: All splinting materials produced master casts with measurements in close proximity to the reference model. However, prefabricated pattern resin bars splinting showed the highest accuracy among the studied techniques. The most recent splinting techniques using prefabricated metal framework and light-cure pattern resin showed similar accuracy.

Thyroid Cancer Knowledge and Awareness in Saudi Arabia: A Cross-Sectional Study.

Background Thyroid cancer incidence has been increasing worldwide over the last few decades. It is the most common endocrine cancer and is most common among females. The study contributes to filling the knowledge gap among Saudi people regarding thyroid cancer. Objectives This research aims to investigate the level of thyroid cancer knowledge and awareness in Saudi Arabia, identify potential knowledge gaps, and develop targeted strategies for enhancing public awareness and education. Methods A cross-sectional, voluntary online survey was conducted from 1st August 2023 to 1st October 2023 among residents living in Saudi Arabia over 18 years of age. The participants included were 2030 respondents. Data analysis was performed using RStudio (R version 4.3.0; R Foundation for Statistical Computing, Vienna, Austria). Results Among the participants, the majority were female (60.4%). A total of 49.7% of the individuals reported having a moderate to high level of knowledge about thyroid cancer. While 63.9% knew the association of a lump in the neck to thyroid cancer, 82.6% affirmed to consult a doctor upon discovering a lump, 72.1% knew that regular monitoring of neck lumps is crucial for early diagnosis and treatment of precancerous conditions, 38.7% were aware of females being prone to thyroid cancer, and 59.2% were aware of the link between lifestyle and increased risk. Higher awareness scores were positively associated with female gender, previously having thyroid function tests done, and previously undergoing a US scan of the thyroid. Conclusion In this study, Saudi individuals are reported to lack some aspects of knowledge and perception of thyroid cancer. This study emphasizes filling the existing knowledge gap in thyroid cancer awareness in the Saudi population.

Parasitic infections in hematopoietic stem cell transplant recipients.

INTRODUCTION: Hematopoietic stem cell transplantation (HSCT) is a vital treatment for various hematological disorders. However, HSCT recipients face increased risks of infectious complications due to immunosuppression. Parasitic infections are a significant concern in this vulnerable population and can lead to substantial morbidity and mortality. This review examines parasitic infections in HSCT recipients, focusing on major infections affecting different organ systems, including intestinal parasites (Giardia spp., Entamoeba histolytica, and Cryptosporidium spp.), hematologic parasites (Plasmodium spp. and Babesia spp.), and tissue/visceral parasites (Toxoplasma gondii, Leishmania spp., and Trypanosoma cruzi). METHODS: A systematic search of relevant literature was conducted and included studies up to August 2023. Databases included PubMed, Google Scholar, were queried using specific keywords related to parasitic infections in HSCT patients. The epidemiology, risk factors, clinical presentation, diagnostic methods, and treatment approaches for each infection were evaluated. RESULTS AND CONCLUSION: Knowing the epidemiology, risk factors, and clinical presentations are crucial for timely intervention and successful management. By emphasizing early detection, effective therapies, and the unique challenges posed by each of these infections, this review highlights the importance of tailored strategies for HSCT recipients. Future research can further refine management protocols to enhance care and outcomes for these patients.

Machine learning applications and challenges in graft-versus-host disease: a scoping review.

PURPOSE OF REVIEW: This review delves into the potential of artificial intelligence (AI), particularly machine learning (ML), in enhancing graft-versus-host disease (GVHD) risk assessment, diagnosis, and personalized treatment. RECENT FINDINGS: Recent studies have demonstrated the superiority of ML algorithms over traditional multivariate statistical models in donor selection for allogeneic hematopoietic stem cell transplantation. ML has recently enabled dynamic risk assessment by modeling time-series data, an upgrade from the static, "snapshot" assessment of patients that conventional statistical models and older ML algorithms offer. Regarding diagnosis, a deep learning model, a subset of ML, can accurately identify skin segments affected with chronic GVHD with satisfactory results. ML methods such as Q-learning and deep reinforcement learning have been utilized to develop adaptive treatment strategies (ATS) for the personalized prevention and treatment of acute and chronic GVHD. SUMMARY: To capitalize on these promising advancements, there is a need for large-scale, multicenter collaborations to develop generalizable ML models. Furthermore, addressing pertinent issues such as the implementation of stringent ethical guidelines is crucial before the widespread introduction of AI into GVHD care.

Role of Anti-CD38 Monoclonal Antibodies in the Treatment of Adult Immune Hematological Diseases.

Daratumumab is a first-in-class human anti-CD38 IgG1 monoclonal antibody approved for treating newly diagnosed and relapsed refractory multiple myeloma. Pre-clinical data supported daratumumab's ability to deplete autoantibodies producing plasma cells, B-cells, and NK cells. Those reports showed promising results on using daratumumab in autoimmune disorders that are refractory to multiple lines of therapies, which encouraged using daratumumab in various autoimmune conditions that are refractory to standard therapies. This review aims to summarize the literature reporting experience using anti-CD38 antibodies in hematological autoimmune diseases, focusing on the most common autoimmune hematological diseases, including autoimmune hemolytic anemia, immune thrombocytopenia, post-transplant cytopenia, and pure red blood cell aplasia.

Factors Affecting Employees Use and Acceptance of Remote Working During the COVID-19 Pandemic: Evidence From the Jordanian Insurance Sector.

Remote working during the COVID-19 pandemic comes as an "enforced experiment," where companies and individuals have turned to work from home to preserve business continuity. Drawing on a theoretical framework that integrates the Theory of Reasoned Action (TRA), Social Capital Theory (SCT), and Technology Acceptance Model (TAM), this research uses a sample of 134 survey responses to assess the factors affecting the acceptance and use of remote work during the COVID-19 pandemic among workers of the insurance industry in Jordan. The results suggest that social trust, perceived usefulness, and perceived ease of use can help elevate employee's acceptance and use of remote work, whereas social norms have no significant effect. Considering these results, we further discuss implications and recommendations for the insurance sector.

Effect of chemical disinfection on the dimensional stability of polyvinyl ether siloxane impression material: a systemic review and meta-analysis.

BACKGROUND AND OBJECTIVES: Polyvinyl ether siloxane (PVES) possesses ideal characteristics for making precise and accurate dental impressions. PVES dimensional stability owes to its better polymeric properties derived from its parent materials poly ethers and polyvinyl siloxanes. As recommended use of chemical disinfecting agents is getting more popular, there is a growing concern associated with the effect of disinfectants on PVES dimensional stability. This study was aimed to understand the PVES behavior when subjected to chemical disinfectants. MATERIALS AND METHODOLOGY: The data was collected from research studies retrieved from Google Scholar, Scopus, and PubMed using MeSH terms of keywords "vinyl polyether siloxane AND Disinfection" or (Vinyl polyether siloxane OR polyvinyl siloxane ether OR PVES) AND (disinfectant OR disinfection)" without any restriction to publication date. The PRISMA (Preferred Reporting Items for Systemic Review and Meta-Analysis) directions were observed during the data collection, screening of studies, and meta-analysis. The primary data were retrieved, and batch exported from databases using Harzing's Publish or Perish software; primary analysis was performed in Microsoft Excel, while statistical analysis for effect size, two-tailed p-values, and heterogeneity among studies was performed using Meta Essentials. The effect size was calculated using Hedge's g values at the 95% confidence level using the random-effects model. Heterogeneity among studies was measured using the Cochrane Q and I2. RESULTS AND CONCLUSION: Dental impressions made from the PVES elastomeric impression materials showed no significant changes in dimensional stability. Immersion in the chemical disinfectant for 10 min was associated with clinically irrelevant changes in the dimensions of the PVES impressions. Disinfection with sodium hypochlorite was associated with clinically significant changes in dimensions, with a two-tailed p-value of 0.049. Disinfection with 2-2.5% glutaraldehyde solution was not associated with any significant dimensional variability.

Chimeric Antigen Receptor T Cells in Hodgkin and T-Cell Lymphomas.

The authors review the current use of chimeric antigen receptor (CAR)-transduced T cells (CAR-T) in Hodgkin lymphoma (HL) and T-cell lymphomas (TCL) and discuss the data on CD30-targeting CAR-T cells, which seem to be safe and effective in HL. In addition, the authors examine the use of CAR-T cells targeting CD30, CD5, or CD7 in TCL, while highlighting the unique challenges of their use in this subset of lymphomas. Furthermore, the authors present future directions and ongoing trials investigating the use of CAR-T cells in TCL and HL.